Description: A premium
quality elastomeric patching compound designed for use
in the construction of professional roof flashings. This
material is a blend of Acrylic polymers with a high solid
Caulk can be used as a patching compound or flashing cement
for filling voids, gaps in parapet walls. Also used to
seal around penetrations, drains, or scuppers. This is
the ideal patching compound for urethane foam roofs.
All surfaces to receive elastomeric caulk must be scrubbed
clean and free from oil, grease, rust, scale, loose paint
material is applied with a stiff brush. Apply in a thickness
of 1/16" to 1/8" and embed polyester membrane
for reinforcement. Apply liberally in joint areas, seams
or cracks. Work material to be a feather edge to allow
for surface drainage.
Clean-Up: All equipment
and tools should be cleaned with warm water and soap if
necessary immediately after use.
Solids Content: 80% by Wt. Weight per Gallon: 13lbs. Dry
Time: Touch Dry: 6 hours at 70° F and 50% Relative
Humidity. VOC <150 g/liter.
Shipping Weight: 5
Gallon Pail: 67 lbs./each; 1 Gallon Can 13lbs.
OR FATAL IF SWALLOWED FOR INDUSTRIAL USE ONLY
Do not induce vomiting. Keep away from heat and open flame.
Avoid prolonged contact with skin and breathing of vapor
or spray mist. Wash hands thoroughly after handling and
before eating or smoking.
Close container after each use.
KEEP OUT OF REACH OF